CKD61160LTECHNOLOGY SCHEME
 CKD61160L

       CKD61160L machine tool is a large horizontal CNC lathe with SIEMENS828 CNC system. The headstock is manual four level, stepless speed in four level.  CNC system can control two linkage axes at the same time, Z axis adopts ac servo motor and rack drive, rack for Taiwan m=5 oblique rack, grating ruler feedback and full closed-loop drive.
       X axis uses ball screw pair and ac servo motor to achieve horizontal movement, half closed-loop drive with good positioning accuracy and repeat positioning accuracy.

2.Main parameter

Machine width of bed                             1100mm

Max swing diameter over bed                      φ1640mm

Max distance between two center              1000mm-16000mm

  
Max swing diameter over slide carriage            φ1250mm


Max bearing weight between two centers           10tons


Vertical four position Electric power tool post AK23320x4


Cutting tool cross section                        40x45

Main transmission

Spindle rotation range                        4-400r/min


Spindle hole diameter                          φ130mm

 
Front taper of Spindle inner hole                  Metric 140#

   
Main motor power                       37Kw servo  motor

Spindle nose                                 1:30


x/Z travel                                  800/800-15800mm


X axis rapid speed                               4m/min


Z axis rapid speed                               4m/min

tailstock

Tailstock shaft diameter                           φ260mm

Tailstock shaft travel                               300mm


Tailstock shaft taper hole                      metric 80#


Four jaw chuck                                Φ1600mm